Contact person: Zhang Xingqian 13912340688
Phone: 0519-81182602
Fax: 0519-81182602
whatsapp：+8618961131360
Website: www.www.932car.com
Email: yz@www.932car.com steven@www.932car.com
FAQ
Nowadays, in many fields, devices such as mixers are being used. However, there are more and more manufacturers, suppliers, agents, etc. in the market, resulting in uneven quality. Many people do not know how to choose a good mixer. The following knowledge can help you understand how to choose a good mixer.
Common knowledge for selecting a mixer:
1. In the face of so many manufacturers, people can screen for mixers such as hopper mixers through online channels, market research, and related consumer evaluations. They can also consult online to see if the customer service of this manufacturer is professional, product pricing, and other information.
2. Select a mixer based on daily production volume. Due to the mixing machine taking about 10 minutes to process each batch of materials, plus the time for discharging and feeding, the processing time for each batch of materials can be calculated as 15 minutes. Therefore, one hour can continuously process four batches of materials. If a mixer with a processing capacity of 100 kilograms per batch is selected, it can process 400 kilograms per hour. Users can choose a mixer according to their own needs.
3. Common knowledge for selecting a mixer: According to the working principle of the mixer, the ability of the double helix belt used for stirring and mixing to push materials in the opposite direction should be basically consistent. Due to the fact that the pitch of the inner spiral belt should be smaller than that of the outer spiral belt, in order to achieve consistent material pushing ability, the pitch of the inner spiral belt should be smaller than that of the outer spiral belt, and the width should be larger than that of the outer spiral belt, otherwise it will cause the material to concentrate in one direction. Related knowledge: What measures can prevent mixer explosions
4. The gap between the spiral belt and the shell in the mixer can be 4 millimeters to 10 millimeters, and the material can be driven by friction to participate in the mixing process. However, due to differences in crushing particle size and friction coefficient of materials, the mixing time of various components of materials may vary, resulting in product unevenness. Currently, some manufacturers have realized this and made improvements to their products.